Stainless steel wire mesh (Manufacture )

1. stainless steel wire mesh 2.wire dia:0.025-4mm 3.. mesh: 20-600 4. width: 1-4m 5. length: 15-30m Stainless steel wire mesh

Size:

Standard roll width:1m to 1.2m

Standard roll length of stainless steel wire mesh: 30m to 100''

Type 304 often refers to as 18Cr,8 Ni, Type 304 is the basic stainless alloy mostly commonly utilzed for wire cloth weaving. It withstands outdoor exposure without  rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit. Type 304: is very similare to Type304, the difference being the reduce carbon content for better weving and secondary welding characteristics.

Type 316: Stabilized by the addition of 2% molybdenum, Type 316 has better resistance to pitting corrosion than the chromium-nickel stainless steels where brines, sulfur-bearing water or halogen salts, such as chlorides are present. Type 316L: is very similare to type 316, the difference being the reduce carbon content for better wire cloth weaving and secondary welding characteristics.

Applications:

Stainless steeel wire mesh made from choice wires are used for separation of solids and clear filtration of liquids, as in the cleaning of fuels,or hydraulic liquids, or in water treatment.

Square Opening wire mesh in Stainless steel:

Plain weave stainless steel wire mesh:

This is the most comonly used style of weaving. Every second wire is woven in , warp and  weft wires run over and under each other alternately and interlock. Plain weave wire meshes guarantee optimum accuracy of apertures of filter pores. Plain weave wire mesh use wires that are thinner than the corresponding apertures.

Twilled weave stainless steel wire mesh:

In cases where increased wire thickness is required in relation to the aperture size, which yield in the weaving process cannot withstand,this style of weave is chosen.At least two wires are woven in pairs, subsequently displacing a single wire. Mesh stability is controlled by a combination of aperture size and wire strength, and displays a slight diagonal trend. Using moderm weaving technology, excellent stability of weave can be achieved.

Following is the spcifiction of the mesh, special mesh can be made by order.

mesh/inch	dia(mm)	hole size(mm)	width(m)
20x20	0.5	0.77	1.5-4
40x40	0.27	0.365	1.5-4
60x60	0.21	0.213	1.5-4
70x70	0.18	0.183	1.5-4
80x80	0.15	0.167	1.5-4
90x90	0.14	0.142	1.5-4
100x100	0.13	0.124	1.5-2
120x120	0.08	0.131	1.5-2
140x140	0.07	0.111	1.5-2
150x150	0.063	0.106	1.5-2
160x160	0.063	0.015	1.2-1.6
200x200	0.056	0.071	1.2-1.6
250x250	0.04	0.061	1.2-1.6
300x300	0.035	0.054	1.2-1.6
325x325	0.035	0.051	1.2-1.6
350x350	0.035	0.042	1-1.2
400x400	0.03	0.0385	1-1.2

 

Stainless steel wire mesh (Manufacture )